• To disconnect the heater, turn controls to off, then remove plug from outlet.
Pull firmly on plug, do not unplug by pulling on the cord.
• Always unplug the unit before moving or cleaning, or whenever the heater
is not in use.
• Use only for intended household use as described in this manual. Any
other use not recommended by the manufacturer may cause fire, electric
shock, or injury to persons. The use of attachments not recommended or
sold by unauthorized dealers may cause hazards.
• Always use on a dry, level surface. Use on ceilings only.
WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit
with any solid-state speed control device.
• DO NOT attempt to repair or adjust any electrical or mechanical functions
on this unit. Doing so will void your warranty. The inside of the unit conta-
ins no user serviceable parts. Only qualified personnel should perform all
servicing.
• When the power cord supply is damaged, it must be replaced by a quali-
fied engineer to avoid danger.
1. Chain with hook
2. Power cable
3. Decorative shade
4. Heated head
5. Heating lamp
6. On/Off switch
7. LED
8. Touch switch
9. Remote control
Warning: Please tear off all the hyaline protect film around the decorative shade first!
• The heater must be installed by a qualified electrician.
• Place the heater on a firm, level ceiling surface. Install the heater on a strong rigid support
(such as strong wooden beams or metal rails, etc).
• The hook on the ceiling hanging the patio heater must be able to take a weight 3 or 4 times
that of the patio heater itself.
• Place the hook around the ceiling hook and clip on any ring of the chain to adjust the height
of the patio heater to the floor.
• Plug the patio heater into a grounded 220-240V 50Hz 13A power outlet.
E NGL I SH
8
PARTS LIST
INSTALLATION INSTRUCTIONS
1
2
3
4
5
6
7
8
9