Idiomas disponibles
Idiomas disponibles
A. BEFORE INSTALLATION
1. Insert the guide panels into the guides of the, air
conditioner. Fasten the curtains to the unit with
screws (TYPE A), as shown Fig. 6.
2. Cut the adhesive-backed seal strip (TYPE D) to the
window width.
Remove the backing from the seal strip and attach
the seal strip to the underside of the bottom
window (Fig, 7)
B. NOW START INSTALLATION
1, LOCAT/NG UNIT IN WINDOW
Open the win_3w and mark center line on the
_nter of the inner sill, as shown in Fig. 8.
2. ATTACH L BRACKET
a. Install the L brackets behind the inner window
sill, with short side of bracket as show& Use the
2 screws (TYPE A) provided.
b The bracket helps to hold unit securely in place.
Be sure to place bracket ewe flush against back
of inner sill. See Fig, 9.
During the foHowing step, hold unit firmly until
window sash is lowered to top channel behind
side panel frames. Personal injury or property
damage may result if unit falls from window.
& INSTALL THE AIR CO
IN THE
WINDOW
& Carefully lift the air _nditioner
and slide it into
the open window. Make sure the bottom guide of
the air conditioner drops into the notches of the
L bracket. See Fig. 9.
IMPORTANT:
When the air conditioner drops into the L bracket, the
air _nditioner
will be centered in window opening as
shown in Fig. 10.
b. While steadying
the air conditioner,
carefully
bring the window sash down behind the upper
guide of the air conditioner, as shown in Fig. 11.
TYPE A
Fig. 6
Fig. 8
iNNER SILL
OUTER S_LL
OUTSIDE
Fig. 9
Fig. 10
UPPER GUIDE
_TTOM
--
GUIDE
TYPE A
L BRACKET
TYPE A
INSIDE
_ENTER LINE
\
CENTER LINE
ADOUT1/4°
Fig. 11
L BRACKET
