Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
•
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
•
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
•
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
•
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
•
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
2.5
BATTERY TOOL USE AND CARE
•
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
•
Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
•
When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or fire.
•
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with plenty of soap and water. If liquid
contacts eyes, immediately seek medical help. Liquid
ejected from the battery may cause irritation or burns.
2.6
SERVICE
•
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
•
Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
English
2.7
SPECIFIC SAFETY RULES
•
Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may
contact hidden wiring or its own cord.Fasteners
contacting a "live" wire may make exposed metal parts of
the power tool "live" and could give the operator an
electric shock.
•
Know your power tool. Read operator manual
carefully.Learn its applications and limitations, as well
as the specific potential hazards related to this power
tool. Obey this instruction will reduce shock, fire or
serious injury.
•
Always wear safety glasses with side shields marked to
comply with ANSI Z87.1.Obey this instruction will
reduce the risk of serious injury.
•
Protect your lungs. Wear a face or dust mask if the
operation is dustyObey this instruction will reduce the
risk of serious injury.
•
Protect your hearing. Wear hearing protection during
extended periods of operation.Obey this instruction will
reduce the risk of serious injury.
•
Battery tools do not have to be plugged into an
electrical outlet; thus, they are always in operating
condition. Be aware of possible hazards when not
using your battery tool or when changing
accessories.Obey this instruction will reduce the risk of
electric shock , fire, or serious injury,
•
Do not place battery tools or their batteries near fire
or heat.This will reduce the risk of explosoion and
possibl injury.
•
Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow.A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
•
Batteries can explode in the presence of a source of
ignition, such as a pilot light. To reduce the risk of
serious injury, never use any cordless product in the
presence of open flame.An exploded battery can propel
debris and chemicals. If exposed, flush with water
immediately.
•
Do not charge battery tool in a damp or wet
location.Obey this instruction will reduce the risk of
electric shock.
•
For best results, your battery tool should be charged
in a location where the temperature is more than 50°F
but less than 100°F.To reduce the risk of serious injury,
do not store outside or in vehicles.
•
Under extreme usage or temperature conditions,
battery leakage may occur.If liquid comes in contact
with your sink, wash immediately with soap and water. If
liquid gets into your eyes, flush them with clean water for
at least 10 minutes, then seek immediate medical
attention. Obey this instruction will reduce the risk of
serious injury.
•
Keep these instructions. Refer to them frequently and
use them to instruct others who may use this tool.If
5
EN
Capítulos
Tabla de contenido
