Sage the Tea Maker STM800 Guia Del Usuario página 3

• Do not operate the kettle on
sink drain board.
• Always ensure the appliance
is properly assembled before
connecting to a power outlet
and operating. Follow the
instructions provided in
this book.
• The installation of a residual
current safety switch is
recommended to provide
additional safety when using
all electrical appliances.
Safety switches with a rated
operating current not more
than 30mA are recommended.
Consult an electrician for
professional advice.
• The glass jug must be used only
with the power base supplied.
Do not use on a range top.
• The appliance is not intended
to be operated by means of
an external timer or separate
remote control system.
• Do not touch hot surfaces.
Use the handle for lifting and
carrying the glass jug.
• Attach the jug lid securely to
the glass jug before operation.
• Do not place anything on top
of the lid.
• Do not open the jug lid
during operation as scalding
may occur.
• Extreme caution must be
used when moving the glass
jug containing hot liquid.
• Use caution when pouring water
from the glass jug as boiling
water and steam will scald. Do
not pour the water too quickly.
• To avoid scalding, never fill
the glass jug past the 'WATER
MAX' (when heating water) or
'TEA MAX' (when brewing tea)
line markings.
• Do not operate the appliance
without water. Always fill the
glass jug to at least the 'MIN'
marking. Should it be operated
without water, the boil-dry
protection will shut the power
off automatically. Allow the
appliance to cool before refilling.
WARNING
• Do not remove the glass jug
from the power base during
heating or when the basket is
in operation. Ensure the
appliance has completed the
water heating or tea brewing
cycle before removing the
glass jug from the power base.
• The use of accessory
attachments not
recommended by Sage
may result in fire, electric
shock or injury to persons.
• To turn OFF the appliance,
press the TEA/Cancel button
(when brewing tea) or the
HOT WATER/Cancel button
(when heating water) on the
power base.
EN
®
3