Kenmore 758.154120 Manual Del Usuario página 9

Idiomas disponibles

Idiomas disponibles

Using Your Humidifier
Refill
Display
Function
For maximum run time bottle and base should be
filled. When bottle and base are empty the display
alternates the room humidity reading and "F"
(FILL), indicating additional water is required.
Quiet Comfort
Check
Filter Indicator
The ability of any humidifier to efficiently supply
humidity output relies heavily on the condition of the
filter. As the filter loads with impurities it gradually
loses its wicking capability. When this happens,
moisture output is reduced and the humidifier has to
work longer to satisfy the selected setting. This
humidifier has a check filter reminder timed to appear
after 720 hours of operation. When the CF message
is displayed, disconnect the power cord and check the
condition of the filter. If a build-up of deposits or
severe discoloration is evident replace the filter to
restore maximum efficiency. The CF
message is
reset when the humidifier is plugged back in.
Refill Display
Dry Out
Mode
at this time the unit will automatically switch into the
DRY OUT mode and continue to run on Whisoper
for a tow hour period.
Note:
During this time the room humidity level will
continue to be monitored and the humidifier will
cycle the fan on and off until the filter is completely
dry. The fan wilt shut off leaving you with a dry
humidifier that is less prone to mold and mildew
growth.
If DRY OUT is not desired, refill the humidifier with
water.
Note: Once the dry out cycle is complete, the fan
wilt shut off.
Quiet
Comfort
®
Check Filter Indication
9
loading