Important Remark - Promax RP-080 Manual De Instrucciones

5.- Verify on the TV level meter screen in the SPECTRUM
ANALYSER mode the presence of the two pilot
frequencies generated by the RP-080 as well as the
received signal level to evaluate the attenuation value
from line. Adjust the frequency span to a suitable margin.
6.- Repeat the two steps previously described in order to
verify the following frequency band.
Consequently, the correct equalisation of the selected
installation section will be able to be verified.

IMPORTANT REMARK:

Video carriers generated by RP-080 are not modulated,
therefore do not try to visualize a video picture on TV
receiver or TV level meter since these equipments only
demodulate AM signals.
It is possible to verify the pilot signal level using the
SPECTRUM analyser mode on a TV level meter.
11/06 - 11 - RP-080