Idiomas disponibles
Idiomas disponibles
Step 4. Set up the lower limit (Max.) for alarm
GO/NO-GO
1. The default value is 0G (0.0mT). Press
to modify and setup the default value.
2. Again, press
Step 5. Setup the measurement interval of alarm
GO/NO-GO
1. The default value is 2 seconds. Press
to modify and setup the default value.
2. Again, press
Step 6. Setup year/month/date
1. Go to the mode to setup the year/month/date.
2. Press
modify, the digits of the selected item will flash.
3. Then, press
4. Again, press
Step 7. Setup hour/minute:
1. Go to the mode to setup the hour/minute.
2. Press
modify, the digits of the selected item will flash.
3. Then, press
4. Again, press
Step 8. Clear the manual record:
Go to the mode to clear the manual record
1.
LCD shows
to go to Step 5.
If the min. value is more than the max.
value,
to go to Step 6.
or
or
to go to Step 7.
or
or
to go to Step 8.
appears.
to select the item to
to correct the value.
to select the item to
to correct the value.
.
9
TM-197
or
or
