Idiomas disponibles
Idiomas disponibles
Instructions
T
4
Changing the rear wheels (also the front wheels on
)
Release the parking brake 7. Depress push button 4 and pull the
wheel off. Push the wheel right to the axle's stop. Please ensure
6a
that all wheels are locked in position correctly.
T
2
Changing the swivel wheels (only at
)
To remove, press the pushbutton 6a on the inside of the swivel
wheel bracket 6 and pull the wheel out of the bracket. To assemble
the wheel, insert the fastening pin in the holding device, and engage
it by a forcible push, which is indicated by a click sound.
T
2
Lock-type-swivel wheels (only at
)
To lock the swivel wheels, fold the control lever 5 downwards, the
wheels lock automatically on both sides as soon as they are in the
5
direction of travel. To release, fold the control lever 5 into the hori-
zontal position. On very uneven surfaces, and when going very fast,
we recommend locking the swivel movement, to prevent the wheels
from blocking.
Climatic zone 17
You may open the hood flap to prevent heat from accumulating.
To do so, pull the top cover up. You can fold out the sun shade 20
for additional protection.
WARNING!
Safety harness
Secure your child with the 5-point belt system 14.
Make sure that the shoulder belts D are inserted and the belt fits snu-
gly against your child. You can adjust the length and tautness of the
belts with the belt ends F. You can adjust the width of the shoulder
and lap belts by tilting open the quick-release slider G and pulling on
14
the belt E.
Opening the belt: Press the two buttons B at the same time and
remove the magnetic closer A. The bottom fixing C can then be remo-
ved easily.
Closing the belt: Hold together the two fixings C and attach the
magnetic closer A; the fastener locks automatically.
Canopy attachment 21
Insert then the fixing peg of the canopy in the slot of the
canopy attachment.
Adjusting the footrest
By pressing the two red safety buttons 15 at the same time, the
footrest can be lowered. When lifting it, adjustment of positions is
effected automatically. The footrest can be lengthened. To do this, pull
the two red pins 15
1
and turn the footrest by 180°.
