Smartwares CWR-30005 Manual De Instrucciones

CWR-30005
EN Wired camera system
NL Bedraad camera systeem
DE Drahtgebundenes Kamerasystem
FR Système de caméra câblé
PL Przewodowy system kamer
IT Sistema di videocamera cablato
ES Sistema de cámara por cable
SV Tradbundet kamerasystem
Instruction manual
EN
1
PARTS DESCRIPTION
2
1.
3
2.
3.
4
4.
5.
6.
7.
8.
9.
10. Extension cable (18m)
11. Power connector extension cable
12. Power splitter
13. BNC-video connection cable (recorder)
14. Power adaptor Recorder
15. USB mouse
16. Recorder
INSTALLATION
Mounting the camera
Before mounting the camera is recommended to perform a
connection test, follow the set-up instructions, test the device then
proceed to mounting.
•
•
•
10
•
9
Camera setup
1.
8
2.
7
6
3.
14
15
4.
5.
16
Connecting the recorder to your monitor
1.
2.
3.
4.
System Setup (Quick start)
Infrared LED lights
Lens
Day/night sensor
Adjustable mounting bracket
Power adaptor camera
Power connector camera
BNC video connector camera
Camera power connector extension cable
BNC video connector extension cable
Determine the appropriate location to mount the camera/s. Make
sure there are no wires or pipes in the vicinity or within the walls.
Determine and mark the position of the 3 fixing holes on the
mounting bracket.
Drill 3 holes and insert the 3 supplied plugs into the holes.
Place the mounting bracket over the holes and use the supplied
screws to secure the mounting bracket to the wall.
Connect the power connectors on the extension cables to the 4
power connectors on the splitter. (B)
Connect the BNC Video connectors on the extension cables to
the video connectors on the cameras. (A)
Connect the power connectors on the extension cables to the
power connectors on the cameras. (A)
[A]
[B]
Connect the BNC Video connectors (7) on the extension cables
to the Video input ports on the recorder.
Connect the power splitters to the power adaptors for the
cameras and plug the adaptors into the power sockets. (C)
Connect the power adaptor of the recorder to the recorder and
plug it into a socket.
Connect the HDMI cable from your monitor to the HDMI port on
the recorder, alternatively you can use a VGA cable.
Connect the mouse to the USB port on the recorder.
Connect your network cable to the UTP network connection of
the recorder. Please use your home ethernet cable for
connection.
Power adaptor camera:
Input: 100-240V ~50/60Hz
Output: 12V--- 2.0A
"Use only the power adaptors supplied"
• Enter the username "admin" and create a password then click on
[OK].
• Click on [ NEXT] or if desired, adjust the date, time and
language, etc. then click on [NEXT].
• The system will configure automatically. If your internet
connection is successful the Network Status will show "Healthy
Network". Click on [OK].
• The system is now operational.
Recording To set up a recording schedule -
Scheduled recording – The device will record only during the
scheduled times, to set a schedule for recording -:
• Right click on the mouse to open the main menu then choose –
System Setup → Record Setup → Recording Plan → RESET→
Time.
• Select the desired days and times for recording by left clicking
and dragging your mouse over the schedule blocks on the
monitor.
• Press Apply → OK.
Alarm recording – (Not applicable with this model)
Motion Recording – The device will start recording whenever motion
is detected within the scheduled periods.
• Right click on the mouse to open the main menu then choose –
System Setup → Record Setup → Recording Plan → RESET→
Motion.
• Select the desired days and times for recording by left clicking
and dragging your mouse over the schedule blocks on the
[C]
monitor screen.
• Press Apply → OK.
Playback - To playback a recording -
• Right click on your mouse to open main menu then click on
→Video Playback → choose the date, channel and record mode
→ click Search → The playback file can now be viewed.
Editing your Password
• You can change passwords by right clicking on the mouse to
open the main menu then click on [System Setup] → [System
Admin] →[User] Here you can add and edit users and passwords
the click on [OK].
• Your Password can be composed of numbers, characters and
dots, *, #, and the length cannot exceed 12 characters.
• If you have forgotten your password, please contact customer
service of Smartwares.
Restore Factory Default
Power adaptor recorder:
Input:100-240 ~50-60HZ 0
Output: 12V ---- 2A
SW360