Idiomas disponibles
Idiomas disponibles
Installation
1
Mounting the hardware
Thread the fixture screws (EE) into the
provided holes of the mounting bracket
(FF).
Thread the hex nuts (BB) onto the fixture
screws (EE). Do not tighten the hex nuts
(BB) at this time.
Pull the supply wires out from the outlet
box and mount the mounting bracket (FF)
to the outlet box using the mounting
screws (DD).
Place the back plate of the fixture body (A)
over the outlet box and onto the fixture
screws (EE).
Adjust the fixture screws (EE) until they
protrude out from the back plate 1/4 in.
Remove the fixture body (A) and secure
the position of the fixture screws (EE) by
tightening the hex nuts (BB) against the
mounting bracket (FF).
2
Connecting the wires
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.
Connect the black supply wire to the black
fixture wire using a wire nut (CC).
Connect the white supply wire to the white
fixture wire using a wire nut (CC).
Connect the fixture ground wire to the
supply ground wire using a wire nut (CC).
Wrap all wire connections with electrical
tape for a more secure connection.
DD
EE
BB
A
5
Please contact 1-855-HD-HAMPTON for further assistance.
FF
FF
CC
HAMPTONBAY.COM
