Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Spreading width: 25-115 mm
Operating pressure: 5-8 Bar
Max. pressure: 9 bar (125 PSI)
Compressed air inlet: 1/4" BSP
Weight: 3.25 kg
COMPONENTS
1
Air inlet
IMPORTANT INFORMATION
• Make sure that the CV boot to be mounted is soft and flexible, otherwise it will tear during
expansion. Do not expand the CV boot more than necessary.
• Always wear safety glasses and suitable working gloves when using this tool.
• Never reach between the expansion arms!
OPERATION
1. Put the CV boot over the expansion arms (5) of the tool.
Ensure that the CV boot is firmly seated on the expansion
arms (5).
2. Actuate expansion valve (3) to expand the CV boot to the
required size.
3. Slide tool with expanded CV boot over drive shaft joint.
4. Actuate the release valve (2) to close the expansion arms
(5).
5. Slide the CV boot off the released expansion arms (5).
6. Actuate the expansion valve (3) to pull the tool over the
drive shaft joint.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
CV Boot Air Assembly Tool
(72-113 PSI)
2
Release valve
Expansion valve
Tel.: 02196 720480
Fax.: 02196 7204820
3
4
Safety valve
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 162
5
Expansion arms
