Idiomas disponibles
Idiomas disponibles
Select the "ted" option and confirm by pressing
the
button.
Enter the current year (15-99) using the
buttons. Press the
selection.
Enter the current month (1-12) using the
buttons. Press the
selection.
Enter the current day (1-31) using the
buttons. Press the
selection.
Enter the day of the week (1=Monday, 2=Tues-
day, 3=Wednesday, 4=Thursday, 5=Friday,
6=Saturday, 7=Sunday) using the
buttons. Press the
selection.
The display should then show the current time
with the digits flashing. The time can be chan-
ged using the
and
button to confirm your selection.
The minute digits are shown flashing. The time
can be set using the
the
button to confirm your selection.
A double beep will be heard to confirm that the
date and time settings have been saved.
P3 PROGRAMME CONFIGURATION
You can set your own operating schedule (P3)
for each day of the week by following the steps
below:
Switch the radiator to off/stand-by mode. The
con will be displayed.
Press and hold the
seconds. Using the
following options: "ted"
(time and date), "prog".
(programming) and "ofst"
calibration of the temperature probe).
Select the "Prog" option and confirm by pressing
the
button.
Programming will start on the first day of the week
(1=Monday), and at 0 hours. The day is divided
into 1-hour slots.
and
button to confirm your
and
button to confirm your
and
button to confirm your
and
button to confirm your
buttons. Press the
and
buttons. Press
button for more than 3
button, you can view the
1 Programming function
2 Comfort / Economy selection by time slot
3 Day of the week
4 Selected time slot
5 Time slots (0-24h)
Press the
button to select the COMFORT
mode in that time slot (the entire time slot will
be highlighted). Press the
the ECONOMY mode in that time slot (half the
time slot will be highlighted). And so on until the
24 hours of the day 1=Monday are completed.
Confirm your programming by pressing the
button.
Automatically, it will switch to day 2=Tuesday's
programming, maintaining the programming
established for Monday. If you wish to maintain
it, press the
move on to the next day. Otherwise, you can
change using the
gramming as you wish.
Follow the same steps for each day of the week
until you reach 7=Sunday.
NOTE: no action on any of the buttons for a few
seconds, the device automatically returns to
the standby state. The programming previously
carried out is automatically registered.
CALIBRATION OF THE TEMPERATURE
PROBE
If the radiator is not installed in an optimal loca-
tion to properly detect the room temperature
(e.g. it is installed on a cold wall or there are
.
draughts...) the measured room temperature
may differ from the actual room temperature.
For maximum efficiency, it is advisable to elimi-
nate this temperature difference.
To do so, follow the following steps:
Switch the radiator to off/stand-by mode. The
icon will be displayed.
Press and hold the
seconds. Using the
following options: "ted" (time and date), "prog"
(programming) and "ofst" (temperature probe
calibration).
Select the "ofst" option and confirm by pressing
the
button.
button to select
button directly to confirm and
and
buttons and pro-
button for more than 3
button, you can view the
