Idiomas disponibles
Idiomas disponibles
2
Safety
WARNING! Improper use of the device.
Risk to the patient and the user.
f The safety chapter contains important information on the safety of the device: Please
read thoroughly prior to installation and operation.
The device is built according to state-of-the-art technology and recognized safety
regulations. Nevertheless, its use could constitute a risk of injury of the user or third party
or possibly cause impairment to the device and other property.
2.1
Intended use
PrograMill PM3 is designed for light to medium-duty milling and grinding in both wet and
dry operation in the field of dental technology. Use the PrograMill PM3 exclusively for this
purpose.
In the case of damage caused by improper use or failure to observe the Operating
Instructions, all liability and guarantee claims are void.
The probe system that is available optionally as an accessory must only be used briefly for
adjustment purposes and when the device is operated under supervision.
Please note that only the indications, materials and milling strategies approved by the
manufacturer ensure processing without damage to the machine.
The machine has been designed for milling the following materials:
• Zirconium oxide (IPS e.max® ZirCAD)
• Glass-ceramics (IPS e.max® CAD, IPS Empress® CAD)
• PMMA materials (Telio® CAD, SR Vivodent® CAD, IvoBase® CAD)
• CoCr alloys (Colado® CAD)
• Titanium/titanium alloys (Colado® CAD)
• Waxes (ProArt CAD)
Safety
37
