FIREBOY eco – Operating instructions V00
5
Maintenance
5.1
Cleaning and servicing
W
ARNING
Allow the burner head to cool off before cleaning, disinfecting, and servicing
the device. Switch off the device and disconnect it from the gas supply. Allow
the device to dry before operating it again.
Use a cloth moistened with soapy water or a 70% ethanol solution to clean
FIREBOY eco.
The burner head can be removed for cleaning purposes (see
adding the burner head" on page
available disinfecting or cleaning agents. It can also be replaced with a new
one, see
In the event of an error, clean the ignition electrode with a lint-free cotton
swab saturated with 70% ethanol solution or a small steel brush. If it is bent,
the entire burner head must be replaced.
5.2
Disposal
FIREBOY eco is labelled with the "crossed-out wheeled bin" symbol to
indicate that this device must not be disposed of with unsorted municipal
waste. It is your responsibility to correctly dispose of the waste products by
handing them over to an authorized facility for separate collection and
recycling. It is also your responsibility to decontaminate the products in the
case of biological, chemical, or radioactive contamination so as to protect
from health hazards the persons involved in the disposal or recycling of the
products.
For more information about where you can drop off your waste products for
recycling, please contact your local dealer from whom you originally
purchased the product, or your local council.
By doing so, you will help conserve natural resources and you will ensure
that your waste products are recycled in a manner that protects human health
and the environment. Thank you!
www.integra-biosciences.com
"Accessories and spare parts" on page
11) and cleaned with commercially
17.
Maintenance
"Removing and
15