5.
Align the camera's Mounting Plate Slots to the tabs in the Mounting
Bracket. Push in and slide down to secure in place.
6.
Insert the Fastener Screw through the Fastener on the top of the camera
and Mounting Bracket, then tighten with the screwdriver.
7.
Tighten the pre-installed Locking Screw using the screwdriver.
Note:
To remove the camera battery in the future, loosen the locking screw.
8.
Turn the adjustment ring counter-clockwise to loosen and reposition the camera. Turn the
adjustment ring clockwise to secure the desired position.
Locking Screw
20
