Camera Pairing
cámara
1.
If you do not see your cameras on the NVR display or are adding additional cameras, press and hold
the pairing button until the red LED lights stop flashing, then release the pairing button.
2.
From the NVR display or the Lorex Cirrus app, tap any free channel marked with a
(app) icon.
3.
Tap Pair.
Note:
•
In the app, the message 'Pairing success!' will appear. If you do not see this message, repeat steps
1-3.
•
On the NVR, you will have 30 seconds to pair the camera after you press and hold the pairing button
on the back of the camera.
Jumelage de la caméra
•
Emparejar
•
(display) or
16
