Idiomas disponibles
Idiomas disponibles
Go to Settings > System Information menu and press Update button.
»
Radio will upload its software automatically and restart itself after finishing the
»
process.
Restore Settings
Reset the radio to the factory settings will erase all the settings defined by the user
previously. Confirm resetting the device to the factory settings. Wait for a short
time for the factory settings to be restored.
Notes:
Please read this manual thoroughly and keep this manual as a reference
»
before use of this device.
For safe driving, do not look at the display continuously while driving.
»
Do not allow liquids or solids to get into the device in order to avoid damage.
»
Consult your authorized workshop for repair and maintenance.
Using the device for an extended period while the engine is not running may
»
cause the battery to discharge.
Do not touch the screen with hard or sharp objects, as this may cause
»
damage to the screen.
Faults caused by improper use, as well as the following conditions, are not
covered by the warranty:
Faults due to electrical components.
»
Faults due to external sources (humidity, water, impact, fire, lightning,
»
chemicals, dust).
Use of non-genuine spare parts that are not approved by the manufacturer.
»
Operations carried out on the device other than authorized service.
»
Deleted or altered serial numbered devices.
»
FCC ID : 2AOI6-D716AF
FCC Regulations
(15C) This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not expressly
approved by the manufacturer could void the user's authority to operate the
equipment.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
(15B) This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
www.stellantisinfotainment.com
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Consult the authorized dealer for help.
•
FCC RF Exposure Information
This device complies with FCC RF radiation exposure limits laid down for an
uncontrolled environment.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter and must be installed to provide
a separation distance of at least 20cm from all persons.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
1.
INCORRECT TYPE. DISPOSE OF USED BATTERIES IN ACCORDANCE WITH
THE INSTRUCTIONS.
Operating temperature: -30 ° C to 85° C
2.
D715AF support frequency bands : Bluetooth®/FM/AM/
3.
GPS D715AF max output power : Bluetooth® : 8.90 dBm
4.
Declaration of Conformity
Daiichi Elektronik Sanayi ve Ticaret A.S. hereby declares that the radio equipment
type D715AF is in compliance with Directive: 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.daiichi.com/about/
ENGLISH
7
