Idiomas disponibles
Idiomas disponibles
3. Installation method
NOTE: The PCB is mounted in the upper part of the wired
controller. Be careful not to damage the board with the
slot screwdriver.
3. Fasten the back plate of the wired controller
For exposed mounting, fasten the back plate on the wall with the
3 screws (ST3.9*25) and plugs. (Fig.3-3)
Back pla te
Use two M4X25 screws to install the back cover on the 86 switch box,
and use one ST3.9*25 screw to fix to the wall.
Fig 3-3
Screw hole ÿx ed on the w all,useone ST
Screw hole installed on 86 swit ch box, use t w o
Fig 3-4
Screws (ST3.9*25)
5
mm
3 .9*25
mm
M4X25
V.1
