Idiomas disponibles
Idiomas disponibles
Place the movement sensor:
Insert the sensor into the drilled hole and fix it securely with some
mounting glue if necessary). Then connect the connecting cable to
the switch module.
Mount the LED Strip:
Mount the LED Strip in an aluminum profile.
Connect the wiring from the switch module of the movement sensor
to the LED Strip and connect the input of the switch module to an
LED power supply. Connection diagram see page 2.
Test Operation:
Gently wave once in front of the wave sensor and observe if the LED
Strip turns on. Wave a second time to verify that the sensor detects
motion and turns off the LED Strip.
6.
Technical Specifications
Physical properties
Cable length
Maximum current rating
Input voltage rating VDC range
Detection range
drill diameter
IP rating
Operating temperature range
Use this device with original accessories only. Velleman Group
nv cannot be held responsible in the event of damage or
injury resulting from (incorrect) use of this device. For more
info concerning this product and the latest version of this
manual, please visit our website www.velleman.eu. The
information in this manual is subject to change without prior
notice.
V. 01 – 15/11/2023
LQS03
100 cm
3 A
12-24 V
4-20 cm
8 mm
IP20
-20-45 °C
6
©Velleman Group nv
