Make sure to clean your juicer thoroughly before use.
1. Plug in the device into an electrical socket.
2. Place the lateral power button in the ON position.
3. Place an orange on the cutting compartment.
4. Lower the lid to cut the fruit in half.
5. Place each half of the orange in each one of the squeezer heads.
6. Lower the lid pressing firmly with both hands. You will notice how the juice is deposited in the con-
tainer.
lmportant: The juicer will not work until pressure is applied with both hands.
7. Once all the juice from both halves of the orange has been extracted, remove the oranges and discard
the shells.
8. Repeat steps 5 and 6 until the juice container is full.
9. Remove the juice container and start enjoying your freshly made juice.
WARNING: If your juicer stops unexpectedly, the squeezer cones could be blocked by an excess of pulp.
Remove the pulp stuck under the squeezer cones.
After each use, the juicer should be cleaned properly. Keep your juicer in a dry, well-ventilated place. lf it
is not going to be used for more than 3 days, make sure to wash the parts before the next use.
Dissassembly of your juicer
1. Turn off and unplug your juicer from the power supply before changing accessories.
2. Remove the juice container.
3. Open the top cover completely with both hands placed on each side. Slide the locking rods of the
slots in the back of the base of the squeezer heads.
4. Hold the main body with one hand and gently push up the front lever with the other hand until it
opens. Slide the base of the squeezer cones off the main body.
5. The squeezer cones can also be extracted by simply sliding them off the drive shafts.
6. Remove the tray from the main body.
IMPORTANT: Do not immerse the main body in water or any other liquid. lnstead, use a damp cloth to
clean it. Always switch off and unplug the appliance before assembling, disassembling, or cleaning it.
Use warm water and soap to wash all non-electrical parts. Never use abrasive cleaning agents, as they
may cause damage to your juicer. Non-electric parts can be washed in the dishwasher.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
E NGL I SH
8
OPERATING INSTRUCTIONS
CLEANING AND MAINTENANCE