Idiomas disponibles
Idiomas disponibles
ART. 200559
Technical Data:
Lamp:
Battery: Lithium-Ion 3.7V DC, 800mA
Running time: 3.5 / 6 hours
Brightness: 150 / 1000 Lux @ 0,5 Meter
Charging Time: 3h
Lumen output: 90lm(Main light); 50lm(Spot light)
Main features:
A. 7 bright LED's for the main light, 1 bright LED for the spot
B. Built in magnet on the back side
C. pocket clip
D. Very handy
E. Mini size for pocket
F. USB charging system, convenient charging with computer or other digital devices
Instructions for use:
1. Connect the charger to main electricity. The indicator on lamp will show red if the connect
to main electricity is right.
2. Switch o the lamp before connecting to the charger.
3. The indicator on lamp will turn red indicating charging begins
4. The indicator on lamp will turn green indicating charging completed.
5. Switch sequence one = spot light, second = main light, third = o
Caution:
1. Fully recharge the lamp until indicator turn into green recommend to wait 30 mins before
first use
2. Avoid looking directly into the beam.
3. Switch o the lamp when not in use
4. If lamp will be stored for one month or more, please fully charge it prior to storage.
5. Do not use the lamp near open flames
6. CAUTION: MAX INPUT 5V DC / 1A !!!
Recommend charger:
Connector: micro USB connector
Voltage: 5V DC
Current: MIN: 300mA, MAX: 1A
Power Connection:
Verify that the voltage of the battery charger corresponds to that of the system. Use the lamp
within places prescribed and governed by current regulations on workplaces and electrical
systems. Check that the plug fi t's on the cable is suitable for the work environment, if it is not,
it must be replaced.
Advice for cleaning and care:
The surface of the Berner lamps is made of high grade synthetic material.
Please don't use corrosive or aggressive cleaner, these may damage the surface.
PEN LIGHT LED 7+1
1
EN
