Idiomas disponibles
Idiomas disponibles
4
A B B - W E L C O M E V I D E O K I T
Terminal description - Audio module on the Video Outdoor Station
1
2
16
15
14
13
12
11
10
9
8
7
6
5
4
3
Terminal description - Video Indoor Station 4.3 Handset
1
2
2 4
3
5
6
No.
Description
1
Connector for camera module
2
Connector for device software update
3
Plug-in clamps(COM-NC-NO) for floating output, door opener (30
V AC/DC 1 A)
4
Plug-in clamps(Lock-GND) for door opener (18 V 4 A impulsive, 250
mA holding)
5
Plug-in clamps(DC-GND) for additional power supply
6
Plug-in clamps(a-b) for Bus connection
7
Connector for induction loop module
8
Connector for next module
9
Connector for exit pushbutton
10
Connector for sensor to check the door status
11
Rotary switch to set the address of OS (1-9)
12
Set feedback tone of push button: ON/OFF
13
Configure push button as single column or double columns (ON=
double columns; OFF= single column)
14
Configure function of 1st / 2nd push button
3->OFF, 4->OFF=call indoor station/call indoor station;
3->ON, 4->OFF=switch on lightings/call indoor station;
3->OFF, 4->ON=call guard unit / call indoor station;
3->ON, 4->ON=switch on lightings / call guard unit.
15
Adjust loudspeaker volume
16
Adjust door lock release time, 1-10 seconds
No.
Description
1
Outdoor station selector switch
Set the address of the default outdoor station.
2
Indoor station selector switch
Selector switch X10 sets tens digits, selector switch X1 sets units
digits, Dip switches X100 and X200 set hundreds digits.
3
Primary/Secondary indoor station
Only one indoor station in each apartment can be set as
"Primary" (ON=Primary).
Terminal resistor switch
4
In video installations or mixed audio and video installations, the
switch must be set as 'RC on' on the last device of the line (ON=RC
on).
5
a1, b1 = bus connector
6
a potential free contact, such as a doorbell pushbutton
M A N U A L
Control elements - Video Indoor Station 4.3 Handset
No.
Description
1
4.3" color display
8
1
2
Unlock button 2
• In standby status, press to release the 2nd lock of default out-
door station.
2
• During a call request or communication, press to release the 2nd
lock of the outdoor station which is calling.
3
• During surveillance, press to release the 2nd lock of the outdoor
9
station which is under surveillance.
3
Unlock button
• In standby status, press to release the default lock of default out-
door station. Long press 3 seconds to enable/disable the "Auto
unlock" function on the primary indoor station
4
5
6
7
• During a call request or communication, press to release the
default lock of the outdoor station which is calling
• During surveillance, press to release the default lock of the out-
door station which is under surveillance
4
Surveillance button
• In standby status, press to monitor the default outdoor station
• During a call request, if "One on" mode is used on the (mini)
system controller, only the primary indoor station can show the
image, for the secondary indoor station this button needs to be
pressed to obtain the image
• During communication, long press to take a snapshot
• During surveillance, press to switch to the next video stream or
terminate the surveillance.
5
Mute button
• In standby status, press to activate/mute the ringtone
• In standby status, long press to mute the ringtone of all indoor
stations in the same apartment
• During a call request, press to activate/mute the ringtone and
the call will be terminated after 5 s
• During communication, press to activate/mute the microphone
6
Program button
• In standby status, press to release the 2nd lock of the default
outdoor station by default. If multiple functions are set to the
program button, press to access the "Program button" screen.
7
Setting button
• In standby status, press to enter the system settings
• During communication or surveillance, press to set the volume,
colour, contrast and brightness.
*Induction loop function
8
* The function only applies to M22473-W. It is used for hearing-im-
paired persons. They can wear a hearing aid to hear the voice from
the outdoor station or the indoor station.
9
Handset
• During a call request, pick up the handset within 30 seconds to
accept the call.
• During communication, hang up the handset to terminate the
call.
5
