Sony TSL-SA500C Guia Del Usuario página 31

Unload Selection
Contrast Adjustment
Orientation Setting
When Unload is selected in the Menu screen, the following screen appears.
From this screen you can select what happens when the Unload (LUN0)
command is selected while the fourth cartridge is loaded into the AIT drive.
OFF: The cartridge is returned to the magazine and the first cartridge does
not automatically reload. (This is the factory default setting.)
Please use this as the usual mode of operation.
ON: The cartridge is returned to the magazine and the first cartridge is
automatically reloaded into the drive.
1
Press the SELECT button, if necessary, to move the cursor (z) to the
desired setting. You can press the EJECT button to cancel any change to
the selection and return to the Menu screen.
2
Press the ENTER button to accept the selection and return to the Menu
screen.
When Contrast is selected in Menu screen, the following screen appears. You
can adjust the display contrast from this screen.
1
Press the SELECT button, as necessary, to adjust the contrast.
2
Press the ENTER button.
The contrast setting is accepted and the display returns to the Menu
screen.
When Orientation is selected in Menu screen, the following screen appears,
where you can select the orientation of the display to match your viewing angle.
Unload
Continuous
z OFF
ON
Contrast
Adjustment
pppππππ
Contrast Adjustment Screen
31
Chapter 3 Operation