Tristar WG-2418 Manual De Instrucciones página 19

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
pressing the button
3.Press the buttons
Confirm your selection by pressing the button
4.Press the buttons
denotes male. Confirm your selection by pressing the button
5.Press the buttons
6.Press the buttons
"kg" is chosen as measurement unit,height will be shown in terms of "cm".If "lb" is chosen,height will be
shown in terms of "foot and inches".
7.The programming of personal data is now completed. Your selected memory number will blink on the
display. You may continue to enter data for another user or modify data by repeating the steps (2) to (7).
8.Otherwise, after the memory number flashes for approximate 20 seconds, the remote control will switch
off automatically, or you can switch it off manually by pressing the button
3.Body weight measuring with body fat and water analysis:
1.Gently touch the scale with your foot. The red LED display lights up. After approximately 2 seconds, the
LED turns green
2.Press the button
approximately 2 seconds, "HELO/0.0kg" or "HELO/0.0lb" will appear on the display. The scale is now ready
for use.
3.Press the buttons
and height will be show on display. When "0.0kg" or "0.0lb" appears, the scale is ready for use. The weight
unit can still be changed by pressing the button
4.Stand still with barefoot on the scale and the measurement will start. When your weight is successfully
established, a small "H" will be shown on the display,then "0000" should blinks on the display. After
approximate 2 seconds, your body water and fat percentage will be shown on the display.
percentage of your body which is water and
the scale to read the result of measurement.
5.After displaying your weight, body water and fat percentage for a few seconds, the scale will show
"HELO/0.0kg"or"HELO/0.0lb" and turn to body weight measuring mode automatically. the scale will switch
off automatically in approximate 50 seconds if there is no action on it or you can switch it off by pressing the
button "
" manually.
4.Maintenance Care:
The scale should never get wet.
o
Only clean the scale with a soft cloth and natural cleaning products.
o
Batteries should be removed from the battery compartments if the scale is not going to be used for a
o
period of time.
Do not strike the scale with hard and sharp objects and avoid strong vibration.
o
Do not attempt to disassemble or repair the scale by yourself.
o
Appendix:
It is essential to understand that our body fat is not harmful. It is the excess in body fat that causes many of the health
.
or
to choose your desired weight unit. "kg" and "lb"are available for the selection.
or
to choose your gender. The symbol
or
to choose your age. Confirm your selection by pressing the button
or
to choose your height. Confirm your selection by pressing the button
to switch on the remote control, then "HELO/----" appear on the display. After
or
to find your own memory number and press
.
.
.
indicates the percentage of your body which is fat.Step off
Page 19 of 32
denotes female and the symbol
after data entry.
to confirm. Your gender, age
.
. If
indicates the
loading