• This device is NOT A TOY. Keep out of the reach of
children.
• Cleaning and user maintenance should not be
performed by children without supervision.
• This appliance is not intended for commercial use
or for medical purposes. If you have any health
concerns, consult your doctor before using this
product.
• The device is only suitable for indoor use! Do not
use the device in damp rooms (e.g. when bathing or
showering).
• If you experience any abnormal feeling or discomfort
during use, please stop using this product
immediately and consult your doctor. Failure to do so
can negatively affect your health.
• In particular, people with the following characteristics
should exercise caution and discuss their use of the
appliance with their doctor in advance:
◊ People who are susceptible to electromagnetic
interference, such as, for example, those fitted with
pacemakers and other medical electronic implants.
◊ People who have no heat sensation.
◊ People with malignant tumours.
◊ People with heart disease.
◊ People in the early stages of pregnancy or who
have recently given birth.
◊ People who have an abnormal or curved spine.
◊ People with a cognitive disorder caused by high
levels of peripheral blood flow due to diabetes.
◊ People who have a scar on their skin.
◊ People in generally poor physical condition.
◊ People with osteoporosis, severe fractures, sprains
and muscle pain, acute (head) pains, and similar.
◊ People with a body temperature of 38°C or above
(fever) and acute symptoms of inflammation,
fatigue, chills, changes in blood pressure, etc.
◊ People with tendinitis.
YOUR SHIATSU FOOT MASSAGER HAS THE FOLLOWING
FUNCTIONS:
• Compression via air chamber for the upper side of the foot
• Acupuncture nubs and 3D Shiatsu massage heads
• 2 intensity levels + 3-way adjustable acupressure for the upper side of the foot
• Double heating function for pleasantly stimulating revitalization
• 15-minute auto timer
M30479_Belena_AirBalance_Manual_20211022_BS.indd 7
M30479_Belena_AirBalance_Manual_20211022_BS.indd 7
INSTRUCTIONS FOR USE:
Please place the product on a level floor. Connect the adapter cable to
the corresponding connection on the foot massage device and plug the
adapter into the socket. Turn on the massager at the control panel.
IMPORTANT:
This device switches itself off automatically after the 15-minute timer
has elapsed. Choose a comfortable chair of the right height and sit
down, then place your feet on the product.
CONTROL PANEL #2
ON/OFF switch: Press this button to turn on the device.
All buttons are now active. The automatic timer is set to 15
minutes. The acupressure and air pressure function turn on when
switched on, the air pressure for the feet is set to low intensity by
default, the acupressure and kneading speed is set to slow speed
by default. If you press this button again, the entire device will shut
down, all massages will stop, and the system will enter standby
mode. When the time is up, the device will stop massaging and
enter standby mode.
Heat button (level 1 / level 2): It is defaulted to open heating
function in high temperature in startup state. Press heating button
once the red led light is flashing , it's in low temperature state.
Press the heating button again to close the led light and heating
function. Followed by recycling.
Massage speed/intensity (slow - low / fast - high): When the
device is switched on, the speed is set to slow by default. Press the
button again to adjust the speed/intensity to your liking. The speed
changes every time the button is pressed. This is indicated by 2
LED indicator lights, each of which shows the slow/low (left light is
on) and fast/high (right light is on) speed/intensity.
Air pressure / acupressure for upper part of foot (low /
medium / high): When the device is switched on, the intensity is
set to „low" by default. Press the button to switch the intensity to
„medium" - the corresponding indicator lights up. The air pressure
changes each time the button is pressed. WARNING: The higher the
air pressure, the more intense/stronger the massage!
AFTER USE
Turn off the power switch on the control panel and remove the plug from the mains.
CLEANING + CARE:
Before cleaning, make sure that the device is switched off and the power plug has
been removed from the socket. Use a dry cloth to clean the product. Always keep
the product clean and away from wet environments. Cleaning the main unit: Wipe
off the dirt with a damp cloth soaked in soapy water. Only use mild detergents, do
not use alcohol, paint thinner, benzine, or other corrosive liquids. Use of these can
damage the device or lead to cracks or discolouration of the components.
STORAGE:
Store the massager in a cool, dry place out of the reach of children. Avoid
contact with sharp edges or pointed objects that could damage the device.
CHANGING THE COVER (#3)
The cover is washable at 30 degrees. Do not tumble dry! The cover may only be pulled
over the device once it is dry. Do not iron the cover. The cover should only be air dried!
7
22.10.21 12:52
22.10.21 12:52
