Idiomas disponibles
Idiomas disponibles
EN
STEP 3: When the timber is lifted into place, place the timber in the centre of the wedge and press the control handle.dividido A
y el mango de control dividido B para dividir la madera.
WARNING
- ALWAYS use the log splitter for its intended use.
- ONLY use the log splitter for splitting logs, length with grain.
- NEVER modify, alter or change the log splitter in any way, modifications will void the warranty.
- NEVER connect a cord, cable or other device to the control lever on the log splitter. ONLY operate the log splitter in daylight.
- NEVER leave the log splitter unattended while the engine is running.
- DO NOT change the splitting position with the engine running. Contact with the muffler can cause severe burns.
- ALWAYS make sure the beam is in the locked position.
- DO NOT drop the beam as it could crush fingers or damage the log splitter.
- NEVER operate, or allow anyone else to operate, the log splitter under the influence of alcohol, drugs or medication.
- DO NOT put your feet in the range of the wedge activity during operation.
- STOP the engine if the wood catches the wedge and cannot be split or if the wood follows the wedge upwards.
- DO NOT go near the lifting stand when moving.
1. DO NOT carry passengers, sit or stand on the log splitter at any time.
2. Check the hydraulic oil level and visually inspect all hoses and fittings for problems.
3. Inspect the engine and ensure that the engine oil level is correct.
4. Before towing the log splitter, the tyres must be fully inflated.
5. Refer to the vehicle owner's manual for proper safety and towing instructions.
42
