Idiomas disponibles
Idiomas disponibles
After use
1. To ensure the instrument operates at optimal performance it should be
regularly cleaned.
2. Always switch the instrument OFF before cleaning.
3. The housing can be cleaned with a damp cloth, taking care that no
water enters the product.
4. DO NOT immerse the electrical/optical parts of the product in water or
other liquids, and never hold it under running water.
5. Any lenses can be cleaned using a cotton bud with a small amount of
distilled water or alcohol.
6. After cleaning, ensure that all parts dry properly before use.
7. The product should be stored carefully, so that it is protected from dust
and scratches.
Troubleshooting
Error Code
Message
Err
Err1
Err2
Err3
Err4
63022087256_MNL_IN_V02.indd 47
63022087256_MNL_IN_V02.indd 47
Cause
Out of measuring range.
Received signal is too weak. Use the target plate or
Received signal is too
strong.
Low battery voltage.
The ambient temperature is
out of the working range.
Solution
Use the device within the
range.
change the target surface.
Target is too reflective. Use
the target plate or change
the target surface.
Charge the battery.
Use the device in the
specified operating
temperature.
47
19/05/2023 4:32:04 pm
19/05/2023 4:32:04 pm
