English
Part description
1 - Blowing Function
3 - ON/OFF power switch
5 - Flexible hose
7 - Canister
9 - Top cover
11 - Metal mesh cover
General assembly instructions
Assembly
1. Take out the vacuum cleaner and the accessories from the packaging.
2. Release both metal clamps [8] and lift the top cover by the handle [2].
3. Verify that the filter [10] and metal mesh cover [11] are installed correctly.
4. Close the canister [7] by placing the cover back and closing the metal
clamps [8].
5. Insert the flexible hose [5] short part into the suction mouth [4] and turn
counter-clockwise to secure it.
6. Push the aluminium tube [1] onto the hose [5] longer part.
4
10 - Fire proof HEPA Filter
[5]
2 - Carrying handle
4 - Hose connection
6 - Aluminium tube
8 - Metal Clip
[short]
[Longer]
[1]
Instructions for use