Sharp SJ-T2435E0W-EU Manual De Uso página 15

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
CHAPTER -4: FOOD STORAGE GUIDANCE
With putting the foods onto the air suction hole by extracting the the lower shelf located
at freezer door, will affect the performance of the fridge, negatively. Therefore, please be
careful while loading the freezer compartment in order not to close down the air suction
hole.
CHAPTER -5: DOOR REVERSAL
Repositioning the door
• It depends on which fridge freezer you have as to whether it is possible the reverse the doors.
• It is not possible where handles are attached at the front of the appliance.
• If your model does not have handles it is possible to reverse the doors, but this needs to be completed by
authorised personnel. Please call Sharp service.
CHAPTER -6: TROUBLESHOOTING
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or when a problem occurs in the
appliance. Warning codes are displayed in the Freezer and Cooler Indicators.
ERROR TYPE
ERROR TYPE
Sr
Sr – Set
value blink
Freezer comp. Not
on the
Cold enough
freezer set
value screen
Sr – Set
value Blink
"Refrigerator comp.
on the cooler
Not Cold enough"
set value
screen
Sr – Set
value blink
on the
"not cold enough
freezer and
cooler set
value screen
Sr – Set
value blink
Refrigerator comp.
on the cooler
set value
screen
Some parts have stopped
"Failure
working or there is a failure
Warning"
in the cooling process
This warning will be seen
especially after a long term
Ideal temperature for Ref.
Compartment is +4
you see this warning your
foods is at risk of spoiling.
This is a combination of
"not cool enough" error for
Warning"
both of the compartments.
The foods starts to freeze
because the temperature
too Cold
WHY
Contact the Sharp help desk as soon as
possible.
1. Do not freeze the foods that have
thawed and use it in a short time period.
2. Set the freezer temperature to colder
values or set the super freeze, until
the compartment achieves a normal
power failure
temperature.
3. Do not put in fresh food until this
warning is off.
1. Set the refrigerator temperature to
colder values or set the super cooling
mode until the compartment achieves a
C. If
o
normal temperature.
2. Do not open the door frequently until
this warning is removed.
You will see this failure when first starting
the appliance. It will switch off after
the compartments achieves a normal
temperature
1. Check if the "Super cooling mode"
is on
2. Decrease the refrigerator temperature
is too low.
values
EN -14-
Air suction hole
REMEDY
loading