Parts And Controls; Getting To Know Your Device; Intended Use; To Use - Beurer BY 52 Manual De Instrucciones

3. Parts and Controls

1. Base
2. Lifter
3. Cover
4. Power Cord
5. MIN/MAX Fill Lines
6. Control Panel
7. Power LED
8. Heat LED
9. Time/Temperature Display
10. Time/Temperature Set Button
11. Power Button
12. Rapid Heating Button

4. Getting to know your device

With this Bottle Warmer you can quickly heat baby food and drinks and keep them warm in an energy-efficient
manner. This device is suitable for all conventional baby bottles and jars. This Bottle Warmer enables rapid
warming of baby food/drinks and has a Keep Warm feature to keep foods/drinks at a preset temperature.
The device has the following functions:
• Rapid warming of baby food/drinks.
• Keeps food/drinks constantly warm with exact entry of the desired temperature.

5. Intended use

The device is intended for use in the domestic/private environment only, not in commercial situations. Only use
the device to warm up baby food/drinks and keep them warm. This device may only be used for the purpose for
which it is designed and in the manner specified in the instructions for use. Improper use can be dangerous. The
manufacturer is not liable for damage resulting from improper or careless use.

6. To Use

1. Ensure the bottle warmer and all parts (including the power cord) are not damaged.
2. Place the Base on a firm, even surface. Insert the power plug into a standard 120 VAC electrical outlet; the
Power LED will illuminate indicating the Bottle Warmer is ready for use.
3. Place the Lifter into the Base and place your baby bottle or jar into the Lifter.
4. Add water into the Base until the level is between the Min and Max markings. Ensure the water does not
overflow.
To Warm:
1. Press the Power Button followed by the Rapid Heating Button. The set warming time will flash on the
Display. On first use, the default setting of 15 mi nutes is displayed. If the Bottle Warmer remains plugged in
after the first use, it shows the last entered warming time when used again.
2. Enter the warming time (3-18 minutes) by pressing the "+" Button repeatedly until the desired warming time
(in minutes) displays. After "18", the display begins again at "3".
3. Warming time depends on the initial temperature, the type and amount of contents, the container material,
and the temperature of the water used to fill the Base. Use the follow ing table as a guide for selecting an
appropriate warming time.
Contents
4 fl oz (120 ml) milk/chilled
8 fl oz (240 ml) milk/chilled
6 fl oz (180 ml) puréed food at room temperature
4. Press the Rapid Heating Button again to start the warming process. The remaining warming time will appear
on the Display. The Display starts to flash one minute before the end of the warming process. The warming
process stops when the set warming time elapses; the Heat LED and the Display will shut off.
2
3
4
9
10
11
12
Duration (for a temperature of 99 °F / 37 °C)
~ 8 mins
~ 14 mins
~ 8 mins
4
5
1
6
7
8