Samsung LE32R3 Manual Del Propietário página 19

Listening to the Sound of the Sub Picture
Resetting the Sound Settings to the Factory Defaults
Connecting Headphones
Setting and Displaying the Current Time
During the PIP features activation, you can listen to the sound of the sub
picture.
1. Press the MENU button to display the menu. Press the
select "Sound", then press the ENTER button.
2. Press the or button to select "Sound Select", then press the ENTER button.
3. Press the or button to select "Sub". Press the ENTER button.
4. Press the EXIT button to exit.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
You can select this option when the "PIP" is set to "On".
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset
function after setting the equalizer resets the equalizer setting to the factory
defaults.
1. Press the MENU button to display the menu. Press the
select "Sound", then press the ENTER button.
2. Press the or button to select "Reset", then press the ENTER button.
3. Press the EXIT button to exit.
You can select this option when the "Game Mode" is set to "On".
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
You can set the TV's clock so that the current time is displayed when you press
the INFO button. You must also set the time if you wish to use the automatic
On/Off timers.
1. Press the MENU button to display the menu. Press the
select "Setup", then press the ENTER button.
2. Press the or button to select "Time", then press the ENTER button.
3. Press the ENTER button to select "Clock Set".
4.
To...
Move to "Hour" or "Minute"
Set the "Hour" or "Minute"
Press the ENTER button.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
English-17
or button to
or button to
or button to
Press the...
or button.
or button.