Idiomas disponibles
Idiomas disponibles
ATTACHING THE EASY CLICK
ROUTER MOUNTING PLATE TO
THE ROUTER (Figs. 5–7)
The router mounting plate included with this
router table is designed to fit the routers in
Chart 1 on page 14. The router mounting plate
also features access holes to allow use of the
over-table height adjustment (OTA) feature on
certain router models. See Fig. 7 for OTA access
hole. Refer to your router manual for additional
information on using this feature.
Disconnect the router
from the power supply
before installing router into the table,
making adjustments, changing acces-
sories, removing the router from the table,
performing maintenance, or storing the
tool. Such precautionary safety measures
reduce the risk of unintentional tool operation.
1. Remove the plastic subbase from your router.
(See Fig. 5.)
•
If you wish to mount the router with the
subbase, you may need to purchase longer
fasteners. Using the subbase reduces the
range of the cutting depth.
2. If your router has its own dust extraction hood
that mounts to the top of the router base and
you want to use it under the router table, this is
a convenient time to install it.
3. Using Chart 1 on page 14, determine the
hardware and hole pattern type for your
router.
•
The screws are driven into threaded holes in
the routerʼs base.
•
Other manufacturersʼ routers are outside of
control. Changes made to these
Bosch's
routers may affect the compatibility to the
fasteners specified and/or supplied with this
table.
•
Always make sure the screw is fully seated
on the mounting plate and that the router
base is firmly against the mounting plate to
ensure secure mounting. If the router, plate,
and fasteners do not seat together properly,
you may need to purchase new fasteners of
a different length or size.
Router Table Setup
FIG. 5
SUBBASE
FIG. 6
is securely clamped in the router table
base. While working, periodically check the
router base fasteners clamping tightness.
Router motor vibration can loosen fasteners
during use, causing the router to fall from the
table.
4. Refer to the mounting plate guide (Fig. 7) on
5. Securely mount the Easy Click mounting
NOTE: Mounting plate must be mounted with the
bent tabs towards the router. Plate must also be
mounted so no router parts interfere with the table
or the router mounting mechanism.
13
REMOVE
Before using the router
table, verify that the router
page 14 and align the appropriate mounting
plate holes for your router to the router base
holes. Before you mount the router, be sure
that the router position does not interfere with
the table switch and Easy Click router
mounting system.
When mounting your router to the mounting
plate, there may be numerous possible ways
to orient the router to the plate. Please
consider all orientations to see which one will
work best when the plate is mounted to the
table.
plate (4) to your router. (See Fig. 6.)
4
