Version 3
- Once the maintenance icon is
displayed, key in the following
combination to complete menu access.
PASSWORD
UP
DOWN
OK
OK
- Once the installer menu has opened,
press
until the display reads EV
Opening Time (this screen can be
used to change the timer with the keys
or
).
- The timer for opening and closing the
solenoid valve has a default setting of
30 seconds; press the
key once to
OK
open the solenoid and start the timer.
Date 11.09.2020
RIGHT
LEFT
OK
OK
- When the timer reaches 0, check the
amount of water that has arrived.
- Adjust the opening time with the
keys until the set amount of water is
reached, based on the slope of the roof
and the calibration table.
Example (2° = 1.5 litres).
OK
- To confirm the changes and quit the
configuration, select
OK
reads Exit, then press
Rules of which to remind the customer
• Explain operation to the customer.
• Run in the evaporation filter (80 hours).
• When the unit is running, keep a porthole open by 3 cm to change the air.
• If the unit needs to be idle for longer than 48 hours, press the DRY key.
• Before winter, press the DRY key and shut the stopcock.
• Explain the importance of carrying out maintenance.
• Register the warranty on the site (this procedure needs to be carried out by the
installer).
9
or
until the display
to confirm.
OK