Master audio PRO Serie Manual Del Usuario página 39

Master Audio
2.1.3. Connection with an active subwoofer
Plug into the INPUT of the cabinet (from a Mixer's output) and then use the LINK
output to carry the signal to the input of the active subwoofer.
Place the MODE switch to the 90Hz FILTER position. The low energy from the Full
Range cabinet will be cut and the overlap between both cabinets will be done in a
perfect way.
The levels of the subwoofer and the Full Range cabinet can be adjusted through the
Gain potentiometer.
Fig.9. Connection with active subwoofer
Fig.10. FullRange/90Hz mode
PRO Series.Version 1.5 Nov10
39