Idiomas disponibles
Idiomas disponibles
REVERSING THE DOOR OPENING
If required, the door opening can be moved from the right (supplied condition) to the left side.
WARNING:
When replacing the door stop, the appliance must be disconnected from the power supply first.
NOTE:
• Ask another person to assist.
• You possibly need: screw wrench, Phillips screwdriver as well as a thin-blade screwdriver.
• Keep the parts to be replaced for another possible door stop change.
• Loosen the screws (1) on the appliance back. Remove the cover caps (2), loosen the screws
underneath and remove the appliance cover.
• Dismount the upper door hinge (3) and lift the appliance door.
• Dismount the door stopper (4) on the underside of the door and attach the enclosed door stopper
on the opposite side. Set the appliance door safely aside.
• Tilt the appliance slightly backwards and block it in this position. Unscrew the feet (5) and (6).
Disassemble the lower door hinge (7).
• Transfer and attach the lower door hinge (7) to the opposite appliance side. Screw in the feet (6)
and (5) accordingly.
• Put the appliance back in the upright position. Put on the appliance door and fix it in the intended
position.
• Transfer and attach the upper door hinge (3) to the opposite appliance side.
• Fasten the appliance cover and replace the cover caps (2).
Check that the door is optimally aligned both vertically and horizontally to ensure a smooth opening
and closing of the door.
34
