Cooper Lighting Solutions Invue ClearCurve Instrucciones De Instalación

IB516118EN
Installation Instructions – ClearCurve
Instructions d'installation – ClearCurve
Instrucciones de instalación – ClearCurve
IMPORTANT: Read carefully before installing product. Retain for future reference. Failure to comply with these
instructions may result in death, serious bodily injury and property damage.
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this
product must be performed by a qualified electrician. This product must be installed in accordance
with the applicable installation code by a person familiar with the construction and operation of the
product and hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting
any maintenance. Disconnect power at fuse or circuit breaker.
Risk of Fire- Refer to product label for specific minimum supply conductor requirements.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Fixture may become damaged and/or unstable if not installed properly.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind
that may arise from the improper, careless, or negligent installation, handling or use of this product.
NOTICE: Green ground wire provided in proper location. Do not relocate.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on
delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be
filed within 15 days of delivery. All damaged material, complete with original packing must be retained.
Safety: This fixture must be wired in accordance with the National Electrical Code and applicable local codes and
ordinances. Proper grounding is required to ensure personal safety.
APPLICATIONS: This lighting fixture is designed for outdoor lighting applications, and should not be used in area
of limited ventilation or inside high ambient temperature enclosures. It must be stored in a dry location prior to
installation.
NOTE: Light fixture must be stored in a dry location prior to installation. Do not expose lighting fixture to rain,
dust or other environmental conditions prior to installation and insertion of photo control or shorting cap (if so
equipped). Best results will be obtained if installed and maintained according to the following recommendations.
WARNING
Brand Logo
reversed out of
black
Invue
INS # INS #