Idiomas disponibles
Idiomas disponibles
PRODUCT FEATURE
1. Knob control, simple and reliable operation, will not bring you a lot of trouble;
2. Plastic shell, elegant, stylish, and light;
3. High mixing and low noise;
4. Various methods of making quick-frozen ice cream;
5. Detachable parts, easy to clean, hygienic and safe.
CAUTION
1. Please read the instruction manual carefully before use.
2. Check if the voltage range used is the same as that marked on the nameplate,
whether the power cord plug and the socket matches, and ensure that the socket is well
grounded.
3. When the power cord or socket is damaged, or any other electrical components are
faulty, do not continue to use this product. It should be immediately sent to the dealer
or local special maintenance network for replacement or repair.
4. Do not place the product upside down, or tilt it above 45。。
5. The power cord plug and air outlet should not be drenched. Do not immerse the
machine in water or other liquid to prevent electric shock.
6. When not in use or cleaning, the power plug must be unplugged.
7. When using, the inlet and outlet should be kept at a certain distance (about 7.5 cm)
from other items, so as not to affect the heat dissipation effect of the machine.
8. Any accessories not recommended by the manufacturer may not be used.
9. Do not allow children or the disabled to operate without any guidance or
supervision.
10. This product should not be placed next to a high-temperature gas or electric stove
to avoid accidents.
11. Do not start the compressor power switch frequently (at least 5 minutes each time)
to avoid damage to the compressor.
12. Metal foil or other conductive materials are not allowed to be inserted into the
machine to prevent fire or short circuit.
13. When taking out the ice cream, do not knock the surface or edge of the container to
avoid damage to the container.
14. Do not start the power switch when the ice cream container barrel is not installed
in place or the mixing fan blade is not placed properly.
15. The initial temperature of making ice cream mixture is 25± 5℃. The prepared ice
cream material cannot be put into the refrigerator for freezing and then put into the
machine for making. In this way, the ice cream will solidify ahead of time and the
motor will be locked. The motor will be cut off because it enters the protection circuit
04
ahead of time, which will cause the machine to misreport the completion of ice cream
production.
16. After starting the machine freezing, do not remove the motor and transparent cover
during the working process.
17. This product cannot be used outdoors.
18. Do not use chemical cleaners and hard tools to clean the product. Do not use
dishwasher to clean the loading bowl, and do not use water to directly wash the
evaporator.
19. After operation, please unplug the power plug in time.
20. When the ice cream machine is started without adding ice cream, there will be a
slight sound of mixing blade scraping to the loading bowl, which is a normal
phenomenon.
21. There are two round copper sheets at the motor assembly of the transparent cover
installed on the upper cover. When using, please wipe the water stains on the
transparent cover and the copper plates. The two copper plates will be connected by
water, which will lead to power failure of the motor. Pull out the power line, wipe the
water stains, and restart it.
22. Save the instruction manual.
PRODUCT INSTRUCTION
1)Structure
05
