Phoenix Contact TESTFOX CC-1 Instrucciones De Servicio página 14

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Prong-Type Multimeter for
-
alternating-current measurement
-
AC-voltage measurement
-
DC-current measurement
-
resistance measurement
-
continuity testing
Contents:
1.
Notes for user
2.
Notes on safety
3.
4.
Description of unit
5.
6.
7.
8.
9.
1.
Notes for user
This Operating Manual is intended for:
-
electricians and
-
persons possessing knowledge of electrical technology.
The TESTFOX CC-1 is designed for measurements in dry surroundings and
must not be used in circuits with rated voltages higher than 600 V (for more
details, see section 6 "Ambient conditions").
The following symbols are used in the Operating Manual and on the TESTFOX CC-1
itself:
Application around and removal from HAZARDOUS LIVE
conductors is permitted.
This symbol indicates an electrical hazard.
This symbol indicates sources of danger when using the
TESTFOX CC-1 (see documentation).
This symbol on the TESTFOX CC-1 indicates that the unit is
protection insulated (safety class II).
This symbol appears in the display for a discharged battery
This symbol indicates the continuity-testing application. The buzzer
provides an audible signal.
DC-voltage or current
AC-current or voltage
Earth (voltage to earth)
Note
After unmark the adhesive label „Warnung..." (on battery compartment lid) the
English text appears.
10/ 2008
Operating Manual
TESTFOX CC-1
TESTFOX CC-1
9
Tabla de contenido
loading

Tabla de contenido