Idiomas disponibles
Idiomas disponibles
Maintenance of the Machine and Accessories
When performing any maintenance on the appliance, the plug (10) must
be disconnected from the electrical socket.
It is a very tough machine and requires only very little maintenance.
However, in order to avoid dirt build-up in the tubes (a), hose (d), accessory components, and dirty
water tank (2) it is important to clean the machine after use.
To do so, switch on the vacuum function and simply vacuum up clear tap water through the parts
that have been used. Please then empty the drawn-in water out of the dirty water tank (2) and rinse
out the tank with clean water.
The dirty water tank (2), float assembly (11) and the "Venturi effect" assembly (12) (the latter are
located inside the dirty water tank (2), can be removed from the appliance in order to be cleaned,
as shown in illustration no. 14.
You should clean the O rings on the accessories at regular intervals.
Clean the vacuum filter (14) at regular intervals. To do so, disengage the filter cover (13), Fig. 15.
Shake the filter and wash it with clean water if necessary. Once dry, reposition the filter in its seat
and refit the filter cover (13).
De-scale the boiler at regular intervals (if necessary). To do so, unscrew the drain plug (15) from
under the machine. Fig. 16.
This procedure should only be carried out one hour after switch-off, when the machine is cool.
12
14
13
11
15
15
2
Fig. 15
Fig. 14
Fig. 16
28
