1. Place the
round end of
the crevice tool
onto the tab on
the handle as
shown.
2. Align the slot on the
flat end of crevice tool
with the tab on the
handle.
3. Press the crevice tool
onto the handle until the
crevice tool snaps into
place.
WAND (TELESCOPING)
The wand length is
adjustable and
requires no assembly.
To adjust, simply
push on the wand
length adjust button
and slide the upper
wand to the desired
height
WAND LIGHT
This vacuum cleaner is equipped with a
light on the extension wand. The light can
be used to illuminate dimly lit locations.
The wand light will operate only when
the vacuum cleaner is
in CARPET setting. The
light will operate when
attached or not
attached to the
PowerMate®.
CREVICE TOOL
Remove the crevice
tool by pulling from
flat end.
Insert the base of the
crevice tool directly
into the handle or bottom of wand for
vacuuming in narrow spaces.
To attach the crevice tool to the handle:
ATTACHMENT USE TABLE
CLEANING AREA
ATTACHMENT
Furniturel
Between
Cushionsi
Drapes 1
Stairs
Bare
Floors
Carpeted
Floors/Rugs
Walls
Dusting Brush
ii)
V
V
V
Crevice Tool
e')
V
V
Floor Brush
%.
V
V
V
PowerMate®
1
I
,
2
V
Pet PowerMate® 3 IS
V
V
1. Always clean attachments before using on fabrics.
2. 3-way On/Off switch should be in HARDFLOOR position.
3. Pet PowerMate® attachment instructions are included with the product.
- 14 -