Idiomas disponibles
Idiomas disponibles
DEVICE SETUP
PLEASE READ FIRST!
You must connect the NVR to a monitor or TV to complete the setup. We recommend verifying all accessories and
completing the NVR setup before installing the cameras. For a full 4K viewing experience, use a 4K monitor/TV
and view your live footage on full screen.
Camera and
Ethernet Cable
Learn how to attach
your RJ45 waterproof
connector cap.
Scan the QR Code:
1.
Connect the cameras, monitor, USB mouse, router, and power supply to the NVR.
Camera
A
RJ45 Waterproof Connector Cap: Connect the RJ45 waterproof connector cap on to each 60ft. ethernet cable.
B
Ethernet Cable: Connect the 60ft Ethernet Cable to the Camera and NVR. Repeat for each camera.
C
(NOTE: Ensure the waterproof connector cap is tightened over the connection)
Modem/Router: Connect the modem/router (not included) to the NVR with the 6.5ft Ethernet Cable.
D
(NOTE: Wired Ethernet connection required, NVR cannot connect to the modem/router via Wi-Fi)
Monitor/TV: Connect the monitor/TV to the NVR with the HDMI cable.
E
USB Mouse: Connect the USB mouse to the NVR.
F
NVR Power: Connect the NVR power cable to a power outlet.
G
USB Port
H
6
A
Camera Tip: When installing the camera, loosen the
screws on the adjustable arm and position the camera
to ensure the best possible camera angle. Tighten the
screws when finished.
B
RJ45 Waterproof
Cap
C
Ethernet Cable (60ft)
A
C
B
Need Help? Visit DefenderCameras.com/support
G
D
E
Monitor/TV
(not included)
Power LED: Indicates the NVR is on.
A
Record LED: Data is being read or written to HDD.
B
Network LED: NVR is connected to a network.
C
H
F
