Idiomas disponibles
Idiomas disponibles
A. INSPECTING THE MOUNTING SCREWS
Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of the screws be
loose, tighten them immediately. Failure to do so could result in serious injuries
B. MAINTENANCE OF THE MOTOR
The motor unit winding is the very "heart" of the power tool. Exercise due care to ensure the winding does not
become damaged and /or wet with oil or water
C. INSPECTION OF THE CARBON BRUSHES
The motor employs carbon brushes which are consumable parts. Since excessively worn carbon results in motor
trouble, replace the carbon brush with an identical part when it becomes worn to or near the limit. In addition,
always keep carbon brushes clean and ensure that they slide freely within the brush holder.
TROUBLE SHOOTING
PROBLEM
PRODUCT DOES NOT START
THE MACHINE STOPS WORKING
AFTER ROTATING SLOWLY
UNUSUAL VIBRATION DURING USE
SPARKING VISIBLE THROUGH THE
HOUSING AIR VENTS
UNSATISFACTORY RESULT
STORAGE AND TRANSPORTATION CONDITION
The device must be stored in a dry, heated room at a temperature of 0 to +40 °C.
The device is transported in closed vehicles in accordance with the rules for the carriage of goods in force on this
type of transport. During transportation and handling operations, the packaging with the product should not be
subjected to sharp impacts and the effects of precipitation. After transporting the router in winter conditions, it is
necessary to keep it at room temperature for at least 2 hours until the moisture is completely dry.
PROTECT OUR ENVIRONMENT
CAUTION! This product has been marked with a symbol relating to removing electric and electronic waste. This
means that this product shall not be discarded with household waste but that it shall be returned to a collection
system which conforms to the European WEEE Directive. Contact your local authorities or stocks for advice on
recycling. It will then be recycled or dismantled in order to reduce the impact on the environment. Electric and
electronic equipment can be hazardous for the environment and for human health since they contain hazardous
substances.
WARRANTY
Practyl products are designed to the highest DIY quality standards. Practyl provides a 36 month warranty for its
products, from the date of purchase. This warranty applies to all material and manufacturing defects which may
arise. No further claims are possible, of whatever nature, direct or indirect, relating to people and /or materials.
Practyl products are not intended for professional use.
In the event of a problem or defect, you should first always consult your Practyl dealer. In most cases, the Practyl
dealer will be able to solve the problem or correct the defect.
Repairs or the replacement of parts will not extend the original warranty period.
POSSIBLE CAUSE
Not connected to power supply
Other electrical defect to the
product
The battery is low power
Air vents are blocked
The battery is low power
Bit is not well assembled
A small amount of sparking may be
visible through the housing vents
Drill bit is worn or not adapted to
the material to drill
SOLUTION
Connect to power supply
Check by a specialist electrician
Need to charge the battery pack
before operating
Clean the air vents
Need to charge the battery pack
before operating
Disassembly and assembly
the blade by strictly following
instructions
This is normal and does not
indicate a problem
Replace with new bit or check the
compatibility between drill bit and
material to drill
EN
- 89
