urmet domus 1092/122 Manual De Usuario página 12

DIP SWITCHES USE
Exposure automatic control (ELC-ALC)
2 kinds of lenses can be chosen by means of ELC/ALC switch:

DC driver lenses (without amplifier); put the switch on position ALC. The electronic shutter
speed is automatically changed according to environment lighting conditions; if the obtained
image is not clear and sharp it is possible to change camera LEVEL adjustments. The electronic
shutter speed is not affected (1/50 second).

MANUAL lenses: put the switch on ELC position. The electronic shutter speed automatically
changes according to light (from 1/150 second to 1/100.000 second).
Backlight compensation (BLC-OFF)
An object with a strong light in the background usually appears dark and not so visible if compared with the
rest of image. To solve this problem and obtain a good compensation, put the dip-switch on BLC position.
The BLC function allows to solve this problem and obtain a good compensation.
Anti-flicker mode (FLC-OFF)
Flicker on the screen can be caused by a 50 HZ fluorescent light source. To reduce this effect, put the dip-
switch on FLC position.
Gain automatic control (AGC-OFF)
Put the dip-switch in AGC position to increase the signal amplification under poor light environmental
conditions, allowing to have a brighter image also under poor light conditions.
The camera 1092/122 can be installed using a support bracket.

Fasten the fixing support to the camera with the three screws.

This support can be installed on both camera sides.
Bracket
mounting holes

Fix the base on the lower side for wall mounting or on the upper side for ceiling mounting.
12
support
DS1092-073