Robust RB-MG 135 E Manual De Instrucciones Original página 17

2. Layout and items supplied
2.1 Layout (Fig. 3)
1 On/Off switch
2 Speed controller
3 Clamp nut
4 Locking knob for collet chuck
5 Cover
2.2 Items supplied (Fig. 1/2/3)
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Case
•
Grinding disks
•
Grinding belts
•
Clamping spindles
•
Cutters
•
Felt polishers / arbors
•
Drill bits
•
Drive unit
•
Grinding pins
•
Grinding disks
•
Clamping sleeves
•
Cutting wheels
•
Flexible shaft
•
Table clamp
•
Telescopic stand rod
•
Grinding heads
•
Wire brushes
•
Original operating instructions
Anl_RB_MG_135_E._SPK7.indb 17 Anl_RB_MG_135_E._SPK7.indb 17
GB
3. Proper use
The Grinding and Engraving Set is designed to
perform drilling, grinding, deburring, polishing,
engraving, cutting, milling and cleaning jobs
on wood, metal and plastic in model-making,
workshop and household applications. Use the
tool and accessories only for those applications
described.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Operating voltage of the drive unit: ..110V ~ 60 Hz
Power input: .............................................. 135 W
Idle speed n : ..........................10000-32000 min
0
Clamping range: .................. 0,5-3,2 mm/0,02"-
Protection class: ...........................................II /
Weight: .....................................................0.61 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ..................... 68,5 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ....................... 79,5 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Vibration emission value a
K uncertainty = 1.5 m/s
- 17 -
-1
/ "
1
8
≤ 2.5 m/s
2
h
2
15.12.15 08:14 15.12.15 08:14