Led Lenser h14R.2 Instrucciones De Uso página 5

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
again and the charging cable (micro-USB) of the
Accumulator-pack. But it is no problem to go
on loading the Accumulator-pack although it is
already full.
Instead of connecting the charging cable to the
USB port of the charger, you can also connect
it to a different USB port (5 V / 900 mA) e.g. of a
computer.
While using our optionally available car USB
charger connection (Led Lenser Car Charger:
Item no. 0380), the H14R.2 also can be charged
at the cigarette lighter and sockets in vehicles.
These accessory units match themselves
automatically to the respective input voltage
(12 V ó 24 V). These alternatives are suitable to
charge the Accumulator-pack in case a power
outlet is not available.
Note – Please ensure that there is no short-
circuit at the charging contacts. The charging
contacts may not be touched with moist or
metallic objects.
10. Charge indications
In case you are charging the Accumulator-Pack
of the H14R.2 with the corresponding charger
and charging cable respectively by a USB port
(see Point 9) the status LED at it glows while
charging in red and the light changes to green
when the charging is completed. The white LED
of H14R.2 couldn't use while charging.
11. Changing of the Accumulator-Pack / Li-ion-
Accumulator / Alkaline batteries
Prior to the change, please turn off the H14R.2.
On the button side of the head lamp battery box
there is the gate of the battery box. Open the
battery box rear cover, remove the battery, and
then insert a new one.
Also alkaline batteries can be inserted. But then
the charger cannot be used!
During insertion, it is always necessary that
this is in the correct direction. Therefore, pay
attention to the polarities (+ and -) both in the
battery box and also on the Accumulator-Pack
/ alkaline batteries. Otherwise, the hypothetical
risk that Accumulators / batteries are damaged
and may explode.
The supplied Accumulator-Pack can only be
recharged with the original charger or by a USB
port (see Point 9)!
After replacing the cover of the battery box has
to be closed again.
12. Headband
The headband can be washed, and please refer
to the picture about how to disassemble and
assemble the headband.
13. Rechargeable batteries / Accumulators
Non rechargeable batteries or other
accumulators that are not of the same type as
the accumulator that is scope of delivery are not
allowed to be charged by the charger. Never use
non rechargeable batteries and accumulators
together. Change always all non-rechargeable
batteries and accumulators at the same time.
Use in the H14R.2 below batteries can be used
4 x AA alkaline / 4 x AA Ni-MH / 4 x CR123A
Lithium batteries / 4xCR123A rechargeable
Lithium batteries / 2 x ICR 18650 batteries / Li-
ion battery pack.
If you intend not to use the item for an extended
period, please take out the Accumulator-Pack
respectively the NiMH-Accumulators / alkaline
batteries in order to avoid damage.
Used batteries and accumulators have to be
taken out the item and disposed of in keeping
with the national laws.
13. Disposal for rechargeable batteries and
non-rechargeable batteries
Basically, the possibility of short-circuits of
accumulators and batteries must be eliminated
and they may neither be opened, nor enter the
human body in any way, nor may they be thrown
into a fire.
14. Cleaning
For cleaning, please use a dry, lint-free, clean
cloth.
If salt water is spilled on the head lamp, it must
be immediately entirely removed with such a
cloth.
The headband can be washed in a washing
machine at 30 °C.
15. Scope of delivery
The H14R.2 incl. headband is supplied with the
following accessories:
1xH14R.2 headlamp;
1xcharger and plug;
1xUSB cable, connect the rechargeable battery
and charger for charge;
1xLi-ion battery pack;
1x user manual.
16. Caution
Do not swallow any small parts or batteries/
accumulators that are present. The products
or parts thereof (including batteries /
accumulators) must be stored outside the reach
of children.
For reasons of safety and approval (CE), the
product must not be modified and/or changed.
The product is to be used exclusively as an
accumulator or battery powered lamp. If the
H14R.2 is used for any other purpose, or used
incorrectly, it can get damaged and hazard-
free use is not guaranteed any more (danger
from fire, short-circuit, electric shock etc.).
There is then no liability for harm to persons
or damage to property, and the warranty of the
manufacturer is also rendered null and void.
The temperature range in which the H14R.2
can be operated is -20 C° to +50 C°. Ensure that
the H14R.2 is not subjected to more extreme
temperatures, intense vibrations, explosive
atmosphere, solvents and / or vapors. Also
continuously exposed to direct sunlight, high
humidity and/or moisture have to be avoided.
Changes, repairs and maintenance over and
above those described in the documents
accompanying the product may only be carried
out by authorized technical personnel.
Once it is found that the product is filled with full
batteries / accumulators in correct orientation
(polarity!) and correctly closed, but nonetheless
a normal, safe operation is not possible or the
product shows damage, it must be rendered
inoperative and not used any further. In this
case, for warranty matters, contact your dealer.
17. Safety instructions
This product is not a children's toy.
GB
04
Tabla de contenido
loading

Este manual también es adecuado para:

H14r.2H14r

Tabla de contenido