Bosch GDR Professional 18 V-LI MF Manual Original página 14

14 | English
(16) Cover lid
Technical data
Cordless impact screwdriver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
– Impact screwdriving operating mode
Impact rate
Maximum torque, hard screwdriving applica-
tion according to ISO 5393
Machine screw diameter
Max. drilling diameter (first/second gear)
– Steel
– Wood
Tool holder
Weight according to EPTA-Procedure
01:2014
Permitted ambient temperature
– during charging
A)
– during operation and during storage
Recommended batteries
Recommended chargers
Recommended chargers for inductive batter-
ies
A) Limited performance at temperatures < 0 °C
Technical data determined using the battery that comes with the product.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-2.
Typically the A-weighted noise level of the power tool is:
Sound pressure level 93 dB(A); sound power level
104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection
Total vibration values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-2. Tightening of
screws and nuts of the maximum permitted size:
2
Screwdriving: a =13 m/s , K=1.5 m/s
h
2
Drilling into metal: a =4.5 m/s , K=2 m/s
h
1 609 92A 4AK | (31.08.2018)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
V=
rpm
rpm
rpm
rpm
Nm
mm
mm
mm
kg
°C
°C
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
used for a preliminary estimation of vibration and noise
emissions.
The given vibration level and noise emission value represent
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
2
increase the vibration and noise emissions over the total
working period.
2
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
GDR 14,4 V-LI MF
3 601 JA1 9..
14.4
0–750
0–2800
0–2800
0–3200
150
M6–M14
10/8
21/10
¼" internal hexagon ¼" internal hexagon
1.6–1.9
0... +45
-20... +50
GBA 14,4V...
AL 1820 CV
AL 1860 CV
GAL 1880 CV
GAL 18V-..
GAL 3680 CV
GAX 18V-30
GAL 18... W
GDR 18 V-LI MF
3 601 JA1 0..
18
0–750
0–2800
0–2800
0–3200
160
M6–M14
10/8
21/10
1.7–2.2
0... +45
-20... +50
GBA 18V..
GBA 18V... W
AL 1820 CV
AL 1860 CV
GAL 1880 CV
GAL 18V-..
GAL 3680 CV
GAX 18V-30
GAL 18... W
Bosch Power Tools