Electrical audio input (according to the standard EN 352-8: 2008 and regulation
2016/425/EU)
This product has an electric audio input. The headset limits the entertainment audio signal to 82dB(A)
effective to the ear only if the audio input voltage is below 215 mV (-11.1 dBm).
The product shall not to be used if it can't be ensured that the input voltage doesn't exceed the maximum
value stated above.
In case of malfunction
Before determining that there is a malfunction with the product, make sure you go through this guide
once again and ensure that the problem is not due to weak batteries or user error.
If the problem persists or for any further information on your product, call NUM'AXES after-sales on:
+33 (0)2 38 69 96 27. With the aid of our technicians, many problems can be resolved over the phone.
Depending on the extent of the malfunction, you may need to return your product to NUM'AXES after-
sales to be repaired and tested.
Return your product to your distributor or to:
NUM'AXES
Z.A.C. des Aulnaies
745 rue de la Bergeresse
CS 30157
45161 OLIVET CEDEX FRANCE.
For any repairs, the NUM'AXES after-sales service requires in every case:
− your complete product
− your proof of purchase (invoice or sales receipt)
If you fail to provide either of these items, NUM'AXES after-sales will charge you for the repair.
A flat-rate sum of €25 (incl. VAT) will be charged in the event of an unjustified return to after-sales (e.g.,
dead batteries, batteries wrongly inserted, etc.).
Technical specifications of the headset
Technical specifications of the CAS1034 B headset
Noise reduction (average): SNR
Attenuation of dangerous noises
Sound amplification Up to X3
Microphones
Battery type
Guide d'utilisation CAS1034 B – Indice C – janvier 2023
27 dB
From 75 dB
Up to X3
2 high-frequency microphones with wind noise filters
2 x LR03 (AAA) batteries
17/52