Idiomas disponibles
Idiomas disponibles
Installation (continued)
7
Installing the shower arm
□
Wrap thread sealant tape around the pipe
threads of the shower arm outlet (1, not
included), as shown. Screw the connector (A)
into the pipe inside the wall. Insert the shower
arm (B) into the connector (A) and tighten the
set screw (P) with the Hex wrench
(Hex: 3.2mm, O) provided.
□
Wrap thread sealant tape around the pipe
threads of the tub spout outlet (2, not included)
in a clockwise direction, as shown.
□
Connect the tub spout outlet pipe (the tub
spout outlet pipe should project 1-1/4 in. to
2-1/4 in. from the nished wall) to the lower
pipe elbow (3, not included). Tighten the elbow
and tub spout outlet pipe connections with a
strap wrench.
O
P
B
1
A
3
2
1-1/4 in. to 2-1/4 in.
1
Wall
8
Installing the tub spout
□
Place the tub spout (J) onto quick connection
until the tub spout (J) becomes ush with the
nished wall and tighten the set screw (1) with
the Hex wrench (Hex: 3.97mm, T) provided.
J
10
1
T
