Idiomas disponibles
Idiomas disponibles
electric shock . This tool is equipped with an electric cord having an
equipment-grounding conductor and a grounding plug . The plug
must be plugged into a matching outlet that is properly installed and
grounded in accordance with all local codes and ordinances .
Do not modify the plug provided - if it will not fit the outlet, have the
proper outlet installed by a qualified electrician.
Improper connection of the equipment-grounding conductor can
result in a risk of electric shock . The conductor with insulation
having an outer surface that is green with or without yellow stripes is
the equipment-grounding conductor . If repair or replacement of the
electric cord or plug is necessary, do NOT connect the equipment-
grounding conductor to a live terminal .
Check with a qualified electrician or service personnel if the
grounding instructions are not completely understood, or if in doubt
as to whether the tool is properly grounded .
Use only 3-wire extension cords that have 3-prong grounding plugs
and 3-pole receptacles that accept the tool's plug .
Repair or replace damaged or worn cords immediately .
The Lathe is intended for use on all grounded supply circuits having
a nominal rating less than 110VAC or 220VAC . An example of an
110VAC outlet on this type circuit is illustrated below.
The lathe has a grounding plug that looks like the plug illustrated
above. Do NOT use adaptors that allow you to bypass required
equipment electrical grounding
The lathe may also be used on a 220VAC nominal
circuit. Contact your Service Representative for this
conversion.
BL Series Specifications
BL Series Specifications
Rotor
Diameter:
Maximum Width:
Maximum Thickness:
Drum
Diameter:
Maximum Width:
Maximum Weight
on 1" arbor:
Spindle Speed(s):
Feed Rate:
Motor:
Power Requirements:
Shipping Weight:
* The max rotor and drum diameter is 19 .5" with the hood
installed .
6
Image 1.
152-558 mm (6" to 22")
*
136 mm (5-3/8")
50 mm (2")
152-610 mm (6" - 24")
*
203 mm (8")
90.7 kg (200 lb.)
85, 110, 175 rpm
.002 to .014 in/rev
(infinitely variable)
1 .5 hp
115/230 V, 15/7 .5 amp,
50/60 Hz, 1ph
239 kg (525 lb.) (approx.)
Environmental
Environmental
Information
Information
The following disposal procedure shall be exclusively applied to the
machines having the crossed-out bin symbol on their data plate.
Image 2.
This product may contain substances that can be hazardous to the
environment and to human health if it is not disposed of properly .
The following information is therefore provided to prevent the release
of these substances and to improve the use of natural resources.
Electrical and electronic equipment should never be disposed of
in the usual municipal waste but must be separately collected for
their proper treatment. The crossed-out bin symbol, placed on the
product and on this page, reminds the user that the product must be
disposed of properly at the end of its life .
In this way it is possible to prevent that a non specific treatment of
the substances contained in these products, or their improper use,
or improper use of their parts may be hazardous to the environment
or to human health . Furthermore, this helps to recover, recycle and
reuse many of the materials contained in these products .
Electrical and electronic manufacturers and distributors set up
proper collection and treatment systems for these products for this
purpose .
At the end of the product's working life, contact your supplier for
information about disposal procedures. When you purchase this
product, your supplier will also inform you that you may return
another worn-out appliance to him free of charge, provided it is of
the same type and has provided the same functions as the product
just purchased .
Any disposal of the product performed in a different way from that
described above will be liable to the penalties provided for by the
national regulations in force in the country where the product is
disposed of .
Further measures for environmental protection are recommended:
recycling of the internal and external packaging of the product and
proper disposal of used batteries (only if contained in the product).
Your help is crucial in reducing the amount of natural resources used
for manufacturing electrical and electronic equipment, minimise the
use of landfills for product disposal and improve the quality of life,
preventing potentially hazardous substances from being released in
the environment .
English
