Replacing The Air Filter Sponge; Pulling Rope; Cleaning The Pulling Rope; Replacing The Pulling Rope - eder 1800 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 154
Cleaning and maintenance
88
Capstan winch 1800, 1200, 400

Replacing the air filter sponge

If the air filter sponge is damaged or worn:
Unscrew the air filter cover.
To do so use a suitable tool, such as a Phillips screwdriver.
Remove the damaged or worn air filter sponge.
Insert the new air filter sponge.
Retighten the screws.

Pulling rope

Cleaning the pulling rope

Clean the pulling rope of wood residues and other dirt after every
use.
In case of heavier soiling, clean the pulling rope with clear water or
with rope washing products available from retailers.
Do not use corrosive or aggressive cleaning agents.
After every use dry the pulling rope in air and stow it loose in a rope
bag.

Replacing the pulling rope

Replace a worn, damaged or torn pulling rope promptly.

Spark plug

The spark plug is in the top section of the capstan winch, next to the
air filter cover.

Inspecting the spark plug

Inspect the spark plug at least every 50 operating hours. Be
i
aware of the electrode spacing. The electrode spacing must be
0.5–0.6 mm.
900012 Rev. 01 | 09.2017
Tabla de contenido
loading

Productos relacionados para eder 1800

Este manual también es adecuado para:

1200400

Tabla de contenido